1 / 2
M4 Joints for the FRAKS Flexarm -Heat Insert Press — zdjęcie 1
1 / 2

M4 Joints for the FRAKS Flexarm -Heat Insert Press

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Updated sizes for M4 hardware to hold down joints when using EU standard 1515 aluminium extrusions.

Ocena
0 / 5
Polubienia
2
Pobrania
1
Wydruki
0
Wyświetlenia
50
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

Updated sizes for M4 hardware to hold down joints when using other 1515 aluminium extrusions, which have about 3mm nominal diameter holes; hence needing to tap up to M4.



Updated hardware is as follows:
M3*8mm SHCS -> M4*8mm SHCS