1 / 11
SCX10 II Transmission Skid Plate - 3 Versions — zdjęcie 1
1 / 11

SCX10 II Transmission Skid Plate - 3 Versions

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

SCX10 II style transmission skid plate available in three different versions.

Ocena
3 / 5
Polubienia
3
Pobrania
33
Wydruki
1
Wyświetlenia
137
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

SCX10 II style transmission skid plate available in three different versions. One has built in mounting tabs for the rear upper links which can conflict with some longer motors. The second has no tabs and will require the use of a nut to secure the rear upper links but offers more clearance for longer motors. The third version is the same as the second but with lower link mounting locations that are 5mm narrower offering a little more triangulation. I've included photos showing how I setup supports but you can adjust based on your preferences.

Print Settings Used
Flashforge Adventurer 5M
.4mm Nozzle
.2mm Layers
6 Walls
6 Wall Top and Bottom Shells
75% Gyroid Infill

Tagi