Notchplates (Rastungen) for Simupulte V2+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Derived from „Combined Drive Switch Detent | V2+ Update“ (Simupulte.DE, CC BY-NC-SA 4.0.) Changes CC0.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Notchplates for Simupulte V2+ controllers (https://makerworld.com/en/models/1430231-v2-modular-drive-controller-setpoint-generator-sys) and my derivative version:
Its highly recommend to smooth out the notches with a file (tool), if they are to strong. It otherwise could damage the lever. Because removing is easier than adding I prefer making the rather a little to resistant.
To configure and calibrate the notches that they are synchron with the lever ingame, you need some software
There are diffrent Options: "Zusi3" can be configured with the build in "Kennlinienmodus"
JoystickGremlin could be an universal option: https://github.com/WhiteMagic/JoystickGremlin
For games which do not yet support Joystick inputs I made my own program with AI, this can be found here: https://github.com/EtcsLv2/confJoystick
The Photos might not be updated when future notches are added.
Videodemonstration of the notches: