KTuner v2 Mount for 10th Gen Civic -Poverty Button Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is designed to mount the KTuner v2 to the left of the steering wheel using the blank poverty button space.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model needs to be printed and assembled in a specific way.
Print & Assembly Instructions
Use PETG or any filament that can withstand the heat of being in the car.
Print the parts in the orientations saved in the 3MF file — those orientations are what give the bracket its strength and keep the button working correctly.
The threaded stud is printed on its side for layer strength. Super glue the ball onto the stud's internal threads, then glue the stud into the hole on the mount.
The cutouts are for wire routing: the hole lets the wire come up out of the dash, and the clip snaps over the wire to keep it tucked out of the way.