RCHourglass Transponder Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Transponder case for a RCHourglass transponder. PCB was designed by AndreasM, this case fits that PCB. Info on…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 31
- Wydruki
- 1
- Wyświetlenia
- 392
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Transponder case for a RCHourglass transponder. PCB was designed by AndreasM, this case fits that PCB.
Info on RCHourglass can be found here: https://github.com/mv4wd/RCHourglass
PCB Files: https://oshpark.com/shared_projects/xsPLwajU This is the V2, theres also a V3, which is 0.1mm smaller and just has the components in a different order to match the original schematics. I haven't personally tried V3 but as its smaller it'll fit, but with a little wiggle room.
Slim case was also updated on 03/07/24 with some QOL improvements such as LED hole to easily confirm its working, small gap in the bottom case incase you used the bottom pads to programme and didnt clean up all the solder, its now 1.5mm thinner but still just as strong in my testing, plus centred the wire hole a little better.
Please note I have deleted the bigger version of the case as the PCB files have been removed so unlikely needed by anyone and may cause confusion over which case to print, leave a message if you do need them.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20