Orthodox Cross Signet Ring

A highly detailed, ornate signet ring featuring an Orthodox Cross set within a sunburst background, framed by a beaded border and surrounded by baroque acanthus leaf ornaments on the band.

⚠ License & Terms of Use (Strictly Non-Commercial)

• NO SALES / NO COMMERCIAL USE: This design is strictly for personal, non-commercial use.

• Selling the digital STL files, remixes, or physical 3D prints of this model is strictly prohibited.

📏 Dimensions & Sizing Guide

• Default Dimensions: The default model has an outer face diameter / height of approx. 30 mm.

• Scale to Your Ring Size: Because finger sizes vary, you should scale the model uniformly in your slicer before printing:

  1. Find Your Inner Diameter: Measure an existing ring that fits you, or measure your finger diameter in millimeters (mm).

  2. Check the Slicer Inner Diameter: Measure the inner hole diameter of the ring in your slicer (e.g. PrusaSlicer, Bambu Studio, OrcaSlicer).

  3. Calculate Scale Factor:

     $$\text{Scale \%} = \left(\frac{\text{Target Finger Inner Diameter (mm)}}{\text{Default Model Inner Diameter (mm)}}\right) \times 100$$

  4. Ensure Uniform Scaling is checked so the proportions and intricate details remain intact.

🖨 Recommended Print Settings

• Filament Recommendation: Silk Gold PLA (gives a stunning, shiny metallic jewelry look) or resin (SLA) for the highest level of micro-detail.

• Layer Height:

  • 0.08 mm – 0.12 mm (FDM) for ultra-fine relief details.

  • Adaptive layer height recommended for curved top surfaces.

• Nozzle Size: A 0.2 mm nozzle will yield the crispest filigree results, though a finely tuned 0.4 mm nozzle also works well.

• Orientation: Print angled slightly backwards or flat on the ring base with minimal supports.

• Supports: Tree / Organic Supports enabled for the overhangs inside the band and under the oval bezel.

• Infill: 100% (solid) recommended for strength and a satisfying, heavier feel.