G6 Entry PoE Retrofit Housing - 40 Deg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a housing for the PoE retrofit adapter that allows the G6 Entry to utilize the existing 2-wire doorbell.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
*****************************************************************************************
I made this for myself and it worked well enough for me, but it's definitely not perfect. I'm only sharing it because several people asked for the file.
*****************************************************************************************
The is a customized housing for the G6 Entry and Retrofit PoE Adapter. The mounting holes measured to fit my doorbell. They may fit yours, or you may need to add your own holes to fit your doorbell location.
The tabs that hold the the PoE Adapter broke off on my print, but they were just a convenience. The adapter still sit's inside easily, you just have to hold it in place while mounting.
I used #4x5/8 Phillips panhead self-tapping screws to connect the housing together. Any similar size screw should work.
