1 / 9
Vice soft Grips jaw pads for 75mm by 18mm Jaws — zdjęcie 1
1 / 9

Vice soft Grips jaw pads for 75mm by 18mm Jaws

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

universal Vice Grips 75mm by 18mm Jaws. non-marring. slip-on. high friction. high grip. waffle grip. Grooved.

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
0
Wyświetlenia
29
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Dimensions of the vice jaw it fits on is 75mm by 18mm.

Works on both the fixed and the sliding jaw :)

made For the 75mm Magnusson Portable vice. your vice may have a round bar holding section or other clearances that are different so you should check this works before printing.

Vice grips printed in tpu or pla(works for some use cases). Helps grip onto parts especially rounder parts preventing them from rotating or slipping in the vice.

When measuring my vice, I found the faces were not parallel, not square and were poorly painted lol. So there is some inbuilt tolerance for this. if you have a higher quality vice you may find its slightly loose but shouldn't be to bad especially after you close the vice the first time as forcing the air out the tpu holds well onto the jaws.

Why did i make this?

  • To prevent work piece from rotating.

  • to prevent damage to the vice jaws whilst i work as before i have damaged some of the paint.

  • Other vice grips options didn't seem to fit well especially due to the small round bar holder on the vice jaws of this model

Tagi