safer yoghurt transport to school (customizable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
lid + screw to protect your yoghurt on travel and for storage to keep a clean fridge - with OpenSCAD source
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It's now working - print the bottom screw and the lid to protect your yoghurt on your travels.
Mostly the yoghurt cups have only a thin aluminium foil and with Murphys law there's always a pen or another sharp thing in your backpack to sting in that foil when you have made your homework all by yourself (or e.g. transporting a valuable electronic device...)
As antoher advantage you can store a half used yoghurt nicely in the fridge with other things and it looks neat and clean instead of that crumpled foil on the top.
Another idea is, that you can use an empty and cleaned youghurt cup as a little storage container for things.
The OpenSCAD source comes along, so feel free to play around with it.
The screw itself is made of four displaced circles and linear_extrude in OpenSCAD. Screwing should work fine with prints in PLA or PetG.
Infill with 10-15% is fine, No bed adhesion needed.
I tested the construction with small cups (upper diameter of 71mm) and big cups (upper diameter of 90mm)
I like to use the standard OpenSSCAD-Version for constructing, but the beta with multicore rendering is much faster.
If you want to see if the inner and outer screw fits set lid_screw_displ = 0 and lid_cutout = 1. Maybe there's a gap in height, when you try to print both parts together. Split the objects to each one to print both in one run.