[EQUIP] MICH TC-2026 Helmet — Gelsoft & Airsoft
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MICH TC-2026⚠ Heads up:This is a modular protective helmet for airsoft and gelsoft, built to protect your head, face…
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 558
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
MICH TC-2026
⚠ Heads up:
This is a modular protective helmet for airsoft and gelsoft, built to protect your head, face and ears from BB and gel ball hits. It's not real ballistic or combat-grade protection and isn't meant to stop firearms.
About:
MICH TC-2026 is based on the classic MICH helmet platform and can be extended with interchangeable accessory sets, so you can adapt it to whatever loadout or playstyle you're running.
Project files:
All free files are in the Files tab — 0. FREE – Accessories.zip and 1. FREE – Basic MICH TC-2026 Files.zip. Everything's packed into project archives to keep things easy to work with.
Inside you'll find:
Pre-oriented STL files, ready to print
Assembly manual with step-by-step instructions
Expansion packs:
Everything below is optional and not part of the basic kit. The packs stack — each one adds new hardware you can mix with the base helmet:
2. Print&Pew Cadet — Tactical "cat ears", a cosmetic add-on
3. Modification Master — NVG-T3 + "Anchor-1" mount
4. Elastic Engineer — GPNVG-18 + "Anchor-1" mount + mandible attachment for extra lower-face protection
5. Shadow Unit — CHIMERA-9 set
6. God Of War — MICH AIO Pack: every accessory in one bundle, plus the editable CAD source files
All expansion packs are available on Boosty.
Printing recommendations:
For enough strength and protection, print with a minimum wall thickness of 2mm or more. Works well in PLA, PETG, ABS, ASA.
Live-fire test:
The helmet was tested with a shot from an RX AK-102 replica at 80 m/s from 20cm away. No penetration, no cracking — held up fine.
Video:
Check out our announcement video for new 3D model categories:
Follow & support:
🌏 Website — myu.to
📧 Email — [email protected]
🎥 YouTube — youtube.com/@myuto_arms
✈ Telegram — t.me/myuto_3d
💛 Boosty — boosty.to/myuto
Happy printing!