1 / 1
Luminaire Shot Timer Riser for La Spaziale S1 Vivaldi II — zdjęcie 1

Luminaire Shot Timer Riser for La Spaziale S1 Vivaldi II

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Small riser with press-fit magnets to mount Luminaire shot timer on La Spaziale Vivaldi II.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
14
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

Designed to increase height and provide upward angle to the Luminaire shot timer on a LaSpaziale Vivalid or Lucca A53 espresso machine. 

Intended audience is anyone who:

  • Has a La Spaziale Vivaldi or Lucca A53 espresso machine, and

  • Has purchased the Luminaire automatic shot timer, and

  • Wants to locate the timer near the front of the warming tray without blocking the shot timer display, and/or

  • Wants an upward 20° angle to make the display easier to read.

Designed for (2) 8mm x 1mm magnets on top, where the Luminaire will sit. Be sure to check the polarity, so they attract the magnets in the bottom of the Luminaire.

Designed for (2) 8mm x 3mm magnets on bottom, which will attach to the LaSpaziale warming tray.  

I recommend printing as oriented (i.e., with 8x3mm recesses on build plate) using snug supports. Random seams may help with magnet insertion by avoiding a single long vertical seam in each recess.

Beware that magnets, depending on vendor, will vary from their advertised sizes.  You may need to adjust this design even if you have the "specified" sizes. The FreeCad design file is included for that reason.