Adventure Force Boxer Pro Rear Picatinny
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adventure Force Boxer Pro Rear Picatinny
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description:
This modification replaces the original stock on the Adventure Force Boxer Pro with a 6 slot picatinny rail.
Materials:
2x M3x8 Screws
2x M3x16 Screws
3x M3 Nuts (Suggested)
2x M4x16 Screws
2x M4 Nuts (Suggested)
Printer Settings:
6 walls, PETG recommended, 25% gyroid infill. No supports needed.
Instructions:
1) Remove screws from the blaster and separate the two halves.
2) Gently slide out the original stock. You may need to loosen the screws on the trigger assembly.
3) Find the top of the adapter back by pressing it against the back of the blaster - it will only fit one way.
4) Insert 1 M4 nut into the slot on each of the adapter arms.
5) Attach the top arm to the top of the adapter back with one of the M4x16mm nuts. The nut slot should be facing down.
6) Attach the bottom arm to the bottom of the adapter back with one of the M4x16mm nuts. The nut slot should be facing up.
7) Attach the picatinny rail to the adapter. The M3x16 is at the top and the others are M3x8mm. They should attach to a M3 nut on the other side.
8) Slide the adapter arms into the slots for the original stock. If done properly, the fins should pretty much lock the adapter in place.
9) Reassemble the blaster.