1 / 4
Laser Cut Lid for zdzd's Prusa CORE One UltiMulti MMU3 — zdjęcie 1
1 / 4

Laser Cut Lid for zdzd's Prusa CORE One UltiMulti MMU3

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

DFX file to cut plexiglass to use with zdzd's UltiMulti MMU3

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
105
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

While building zdzd’s Prusa CORE One UltiMulti MMU3, I accidentally cracked the stock top plexiglass trying to cut it down to size manually.

To get a cleaner finish, I modified the original Prusa CORE One CAD file to incorporate the necessary cutouts directly into the flat pattern before bending.

Laser Details & Material:

Cutter: Epilog Fusion Edge (at my local makerspace)

Material: DURAPLEX Clear Acrylic Sheet (0.08" thick × 18" W × 24" L) from the local hardware store

This was my first time using a laser cutter, and the final piece turned out great! There are minor smoke/burn marks along the edges that can easily be avoided with dialed-in laser settings, but the fit is spot on. There are also some cracks where I got overzealous with the screws, but they are just cosmetic.

Hopefully, this saves someone else from cracking their stock acrylic!

 

Tagi