OrcaSlicer Dimensional Calibration Test
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple OrcaSlicer calibration model for checking dimensional accuracy, first layer quality and print consistenc
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
OrcaSlicer Dimensional Calibration Test
A simple calibration model designed to help OrcaSlicer users quickly check dimensional accuracy and general print consistency.
The model includes:
• 40 × 40 × 2 mm base
• Four 8 × 8 × 10 mm corner towers
• One 10 mm diameter center cylinder
You can use this test to check:
• First layer quality
• Dimensional accuracy
• X/Y consistency
• Corner stability
• Cylinder diameter accuracy
• General printer calibration
After printing, measure the base, towers and center cylinder with calipers and compare the results with the intended dimensions.
For a detailed OrcaSlicer setup and calibration guide:
This is an independent community calibration model and is not affiliated with or endorsed by the official OrcaSlicer project.