1 / 2
Vented Valve Case and Valve Caps for flugelhorn valves (trumpet / perinet / piston valve) — zdjęcie 1
1 / 2

Vented Valve Case and Valve Caps for flugelhorn valves (trumpet / perinet / piston valve)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a case for the valve core of perinet valves. It's intended for vented storage.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
35
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution

This is a case for perinet valves of a "Jupiter" Flugelhorn.

The valves tend to get stuck and corrode when it's not in use for more than one week. I need a way to store and dry the valves in order to avoid further corrosion.

Measurements of the valves: <80mm height, 16.5mm core diameter, 19.1mm inner thread diameter

The original valve caps can be threaded onto the non-threaded conical top of the case (the caps push into the plastic).

The picture shows a prototype which has no holes for ventilation in the sides.

Additionally I created a valve cap for the flugelhorn which hopefully protects the inside from dirt and bigger dust particles when the valve is not installed.
Thread: ~0.7mm pitch, inner diameter 19.2mm, outer diameter: 19.6mm