Prusa CORE One Replacement Top Lid & Vent Grill (DXF & SVG)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Laser-ready DXF and SVG cut files to replace the Prusa CORE One top acrylic lid and vent grill.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 121
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After cracking the stock top plexiglass panel one too many times while trying to cut and modify it, I decided it was time to make a repeatable laser-cut replacement.
I extracted the factory lid and vent geometry directly from Prusa’s official f3d CAD model, exported the flat patterns to DXF, and finalized scalable vector files (SVG) in Inkscape.
Cut & Material Specs:
Laser Cutter: Epilog Fusion (at my local makerspace)
Material: DURAPLEX Clear Acrylic Sheet — 0.08 in (approx. 2 mm) thick × 18 in W × 24 in L
Files Included: DXF and SVG formats for both the top lid and the rear vent grill
The laser-cut piece fits the printer frame and stock hinge hardware perfectly. Hope this saves others the hassle of cracking stock acrylic sheets!
Note on photos/makes: If you notice some slight imperfections or misaligned holes in the photos, that was strictly down to user error on the laser setup and working with my only test sheet of acrylic. The uploaded CAD/vector files themselves are exact 1:1 geometry from Prusa's model and will cut clean!
