Wheel Center Cap for 14" Libre Wheels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wheel caps for American Racing Libre wheels. I ran across several people at Z-Con 2017 who had Libre wheels like mine,…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Wheel caps for American Racing Libre wheels.
I ran across several people at Z-Con 2017 who had Libre wheels like mine, but were missing the center cap. One asked if I'd be willing to make a 3D printable model. It took me until 2021 to get around to it.
The mounting holes are sized for an M4 screw. You can just thread it into the plastic, but I want to experiment with inserts at some point.
Print Settings
Printer:
Ender 3 v2
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.2mm
Infill:
20
Notes:
I printed my tests in PLA with 20% infill. If I were actually going to run them on the car, I'd consider ABS and possibly 100% infill, but I've not tested that.
If you print as oriented with supports, you may have trouble removing all the support material from inside. My slicer put support material inside the mounting hole which was a pain to remove. Printing the outer cap (the part that shows) flipped 180 degrees so the open side faces up will avoid the hole getting filled in, but may require additional cleanup to make it look nice.Comment and let me know what worked for you.
Category: Automotive