1 / 5
Prusa CORE One Flush Feet 30mm with original rubber pads — zdjęcie 1
1 / 5

Prusa CORE One Flush Feet 30mm with original rubber pads

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Completely redrawn referencing official CORE One CAD, inspired by other models that lacked CAD files.

Ocena
5 / 5
Polubienia
6
Pobrania
10
Wydruki
1
Wyświetlenia
100
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

NOTE: The actual height is (30 + ~2) mm

Compatible with the Sheet Storage System mod you can see in pics.

BOM

Q.ty

M3x10mm Bolt

4x

Slicing Recommendations

Material: PETG or better (I used ASA with fuzzy skin on the outer faces to hide layer lines)

Layer Height: 0.2mm 

Perimeter Count: 4

Top/Bottom Layers: 5

Sparse Infill Percentage: 40%

Reference/Inspiration:

Want to support my work? Buy me a coffee!

Tagi