ESPEasy based pH, Temperature, and ORP controller for Coral Reef Aquarium
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parts List SparkFun Solder-able Breadboard ESP8266 NodeMCU v1.0 board 0.96' OLED screen with I2C support 2 2.54MM 0.1"…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 798
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v2.0
Parts List
- SparkFun Solder-able Breadboard
- ESP8266 NodeMCU v1.0 board
- 0.96' OLED screen with I2C support
- 2 2.54MM 0.1" 15-PIN FEMALE HEADER
- 4 2.54MM 0.1" 3-PIN FEMALE HEADER
- 2 BNC Connectors PCB Skt 50Ohm MP Black
- Pushbutton Switches SPST 3A MOM PC MNT
- Connectors 3.5mm audio straight
- Waterproof DS18B20 Digital temp sensor
- Atlas Scientific ORP Kit
- Atlas Scientific pH Kit
- 2 4.7kOhm or 10kOhm pull-up resistors
- Assorted 24-26 AWG wires
- 4 M3*30 cap screws
Source code
Repo: https://github.com/yuxhuang/ESPEasy
This is a forked version of ESPEasy. I included a couple Atlas Scientific plugins from the plugin playground and created a new ORP probe plugin.
A Platform IO IDE (vscode or Atom) is required to build and upload the firmware. Please use theTESTING plugin set.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
30%
Filament: Any PETG Black Post-Printing =============
Connect the components using the diagram.
Category: Electronics