Braun Multiquick 7 Attachment Mounting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Braun Multiquick 7 (type 4199) replacement mounting point part for attachments.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My mixer accidentally dropped and the plastic part holding attachments in place broke in two. It was previously somewhat damaged so that attachments was hard do remove from the motor part.
Put the white plastic clip ring into the printed part first
The inner diameter of this part has a really tight tolerance which required moderate force to slide on the motor head.
Carefully apply bending force to get the buttons to slide down into place.
Reinsert the release button covers.
I printed my final version in PETG @ 0.25 mm on a Core One+