1 / 2
12 Gauge Shotgun +1 Shell Carrier / Match Saver, Stage Saver, Plus1 — zdjęcie 1
1 / 2

12 Gauge Shotgun +1 Shell Carrier / Match Saver, Stage Saver, Plus1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Free alternative to similar plus one designs. No 3D printer? purchase one here: https://ebay.io/m/f7pOeg

Ocena
0 / 5
Polubienia
14
Pobrania
179
Wydruki
0
Wyświetlenia
464
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Open Community License v1.1 + General Attribution v1

Use it Carry an extra round, or to carry a specialized round. (breaching, non-lethal, flare, etc)

Apply 3M VHB tape or similar double sided adhesive to largest flat side for mounting.

Must have a flat area below the breech on pump-action shotgun that remains uncovered when the breech is fully opened. 

Want a revision or support for a different shell size? Email me at [email protected] 

I now sell these for a minimal margin if you would like to purchase instead of printing yourself. https://ebay.io/m/f7pOeg

Tagi