Vertical Paper Towel Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vertical Paper towel holder that can mount using screws. The screw holes are 4.5mm, so most self tapping screws should…
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 95
- Wydruki
- 1
- Wyświetlenia
- 662
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Vertical Paper towel holder that can mount using screws. The screw holes are 4.5mm, so most self tapping screws should work fine. Fits regular sized paper towels rolls. Cap provided to add some friction between the holder and the roll to allow you to dispense towels using one hand.
Printed using 0% infill (added metal washers before mounting), however I would stick to +10% infill for structural rigidity.
Print Settings
Printer Brand:
Robo 3D
Printer:
R1 ABS + PLA Model
Rafts:
Doesn't Matter
Supports:
No
Resolution:
200
Infill:
10
Filament: Esun PLA Grey
Category: Household