Prusa CORE One Sheet Storage System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds up to 5 build sheets, drawn referencing official CORE One CAD, inspired by other models.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
REQUIREMENT
THIS MOD IS A REQUIREMENT for this other one.
You need the extra 30mm height under the machine's body.
COMAPTIBILITY
This LED diffuser mod as seen in pics.
FEATURES
Easy slide-in geometry and tilted angle;
Slots get tighter at the back preventing movement/rattle;
Wide first slot for main smooth PEI sheet;
Soft gasket between system and printer limits vibration transfer;
"Hands-free" operation, you'll only be grabbing the sheets from the sides;
The MultiTool is magnetic and also a handy nozzle brush.
BUILD INFO
BOM | Q.ty |
M3x8mm Bolt (Holder-Mount) | 4x |
M3x6mm Bolt (Mount-Gasket-Printer) | 4x |
20x5x2mm Neodymium Magnet (MultiTool) | 1x |
Slicing Recommendations |
Material: PETG or better (I used ASA with fuzzy skin on the outer face to hide layer lines) |
Material (gasket): FLEX (I used TPU 95A) |
Layer Height: 0.2mm |
Perimeter Count: 3 |
Sparse Infill Percentage: 20% (only one layer for gasket) |
Ensure Vertical Shell Thickness: Critical Only |
Supports: See STL notes |
Notes: Embed magnet in MultiTool |