1 / 2
Skadis mount for Freenove Quad M.2 NVMe Adapter for Raspberry Pi (fnk0105) — zdjęcie 1
1 / 2

Skadis mount for Freenove Quad M.2 NVMe Adapter for Raspberry Pi (fnk0105)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Skadis mount for Freenove Quad M.2 NVMe Adapter for Raspberry Pi (fnk0105).

Ocena
0 / 5
Polubienia
1
Pobrania
1
Wydruki
0
Wyświetlenia
68
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Share Alike

Holes are designed to be self tapped, by the m2.5 screws provided with the adapter, and screw into it. Should also work with the adapter mounted on top of the PI, rather than below it, but I didn't test that.

Cause the NVMEs radiate heat this model should propably be printed with PETG, or even more heat resistant materials (not with PLA). I had it running printed with PETG for a bit and it seems fine, although I only have one NVMe in it so with more installed a more heat resistant material may be advised.