UK Disabled Parking Badge Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple hinged holder for the UK Disabled Parking Badge and Clock (Blue Badge)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple holder for organising and protecting a UK Disabled Parking Badge and Clock.
Securely holds both the badge and the parking time clock. Hinged to reduce overall size for easy storage and has a clasp to keep things closed and protected against damage when not in use.
Just open the holder, set the arrival time on the clock disc and place on the dashboard.
The hinge pin can use a short length of filament although I drill it out and used two 50mm M3 bolts.
The clasp is print-in-place and requires no additional hardware.
Both parts should be orientated with the flat outside faces facing the print bed and no supports are required
Print settings:
Nozzle | 0.4mm |
|---|---|
Filament | ASA or ABS recommended as the holder will be subjected to high heat on the dashboard of a car. |
Layer height | 0.2mm Balanced |
Perimeters | 3 walls, 4 top and bottom |
Infill | 15% Gyroid |
Supports | No supports or brim required |