Raised KTuner v2 Mount for 10th Gen Civic -Poverty Button Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mount raises the tuner unlike how the other mount I posted lowers the tuner.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Raised KTuner Mount (10th Gen Civic)
A taller version of my dash mount, designed to solve two problems with mounting the KTuner in the poverty button slot.
Restores button access. The standard mount sits low enough to block the switches beside it — traction control, lane keep assist, collision mitigation braking. This version lifts the tuner clear so you can reach all of them again.
Clears the door handle. If you're running a visor on your KTuner, the extra height keeps it from colliding with the door handle when the door swings.
This is a standalone mount, not a replacement for the standard-height version — pick whichever fits how you use the tuner. If you don't need the switches below and aren't running a visor, the lower mount sits cleaner.
Print & Assembly
Print the parts in the orientations saved in the 3MF file. Those orientations are what give the bracket its strength and keep the button working correctly.
The threaded stud is printed on its side for layer strength. Super glue the ball onto the stud's internal threads, then glue the stud into the hole on the mount.
The cutouts are for wire routing: the hole lets the wire come up out of the dash, and the clip snaps over the wire to keep it tucked out of the way.