AirMini N20 tube adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Resmed AirMini tubing comes with a HumidX housing connector that connects to a N20 mask (with the N20 setup kit).…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 714
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution
The Resmed AirMini tubing comes with a HumidX housing connector that connects to a N20 mask (with the N20 setup kit). Unfortunately, the HumidX housing creates the noise of "Darth Vader" and makes it difficult to sleep. This is an adaptor for the AirMini tubing that by-passes the HumidX housing.
Print Settings
Printer:
Rigidbot original
Rafts:
No
Supports:
No
Resolution:
.1 and .3
Infill:
10
Notes:
There are two parts to this adaptor. The hose adaptor is printed in PLA at 0.1 layer height and the N20 hose connector is printed using a flexible filament at 0.3 layer height (I used TPU).
Category: Other