1 / 4
Spacer for KB Magic Arm and Hollyland Pyro 5 — zdjęcie 1
1 / 4

Spacer for KB Magic Arm and Hollyland Pyro 5

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Spacer for KB Magic Arm and Hollyland Pyro 5

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
25
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
GNU General Public License v3.0

For some reason, the folks over at Hollyland made the anti-twist slots in the Pyro 5 way too shallow to actually receive ARRI pins. Here's a spacer I made that adds a bit of distance between a Kondor Blue 1/4-20 Magic Arm Ball End and the monitor so you can actually tighten it down all the way.

It's a fairly snug fit, but that prevents it from wandering off when you unscrew the monitor. I printed it in Polymaker PC with a 0.25mm nozzle, but I'm sure just about anything like PLA or PETG would work (it's literally a spacer).

Tagi