1 / 1
Square base plate for Bosch GKF125CE trim router — zdjęcie 1

Square base plate for Bosch GKF125CE trim router

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A square base plate for Bosch GKF125CE trim router for use with a straight edge.

Ocena
0 / 5
Polubienia
3
Pobrania
15
Wydruki
0
Wyświetlenia
78
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

I made this square base plate for Bosch GKF125CE trim router because I wanted to run the router against a straight edge and wasn't sure the round base would be sufficiently centered on the bit axis.

Print in PLA with 6 perimeters (walls) to make sure there is solid plastic under the screw heads.

The centers of the screw holes are evenly distributed (120 degrees apart) on a circle with 46 mm radius, in case you want to make another base plate for this router.

Tagi