1 / 1
Robot Gripper — zdjęcie 1

Robot Gripper

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A static mechanical robot gripper display model showcasing intricate linkage geometry and industrial design.

Ocena
0 / 5
Polubienia
3
Pobrania
7
Wydruki
0
Wyświetlenia
74
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Sculptures
Licencja
Creative Commons — Public Domain

1. Build the Base and Center Core

  • Align the two large main frame halves (grey) so their center channels face each other.

  • Place the central teal rod assembly right into the center channel, ensuring the rectangular block is captured inside the middle cavity.

2. Connect the Inner Linkages

  • Use the short grey linkage bars to connect the central teal block to the inner holes of the main frame.

  • Secure these pivoting joints using the bolts.

3. Attach the Outer Linkages

  • Position the longer blue linkage arms on the outer sides of the main frame.

  • Insert bolts through the linkage ends into the outer holes of the frame to establish the scissor-action movement.

4. Mount the Gripper Jaws

  • Position the two large, T-shaped teal gripper jaws at opposite sides of the assembly.

  • Line up the free ends of both the blue and grey linkages with the holes on the gripper jaws, then pin them securely in place with the remaining bolts.

5. Final Alignment

  • Check that all 20 screws/bolts are properly seated and level.

  • Ensure the connections are snug but not overtightened.

Tagi