Bose Companion 5 Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to clean up my desk and the massive Bose Companion 5 Speakers have a big, heavy stand and were always in my…
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 136
- Wydruki
- 2
- Wyświetlenia
- 1642
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to clean up my desk and the massive Bose Companion 5 Speakers have a big, heavy stand and were always in my way and behind the monitors.
This is a 2 part design with one wall mount that has a pocket and a speaker clamp that snaps right into the original stand holes. Use the original screw to fix the speaker clamp. Here is a Youtube video (not by me) how to remove the stand: https://www.youtube.com/watch?v=O-JSRFlw17I
This is my first design and it created it month before my Prusa Mini arrived, but it works really well. I'm sure there are smarter ways with less material and no support to accomplish the task but I'm fine with this one.
Obviously you'll need a screwdriver another 2 screws to fix the wall mounts to the wall. The clamp uses the original Bose stand screw. Nails would work too but there is not much space for hammering the nail. It will not work on Bose Companion 3 and there is a new Bose Companion 50 design that also looks different.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
30%
Filament: Prusament PLA Galaxy Black
Notes:
3 perimiters.rnrnThis version needs a little support on the speaker clamp, as you can see, when you print the parts upright standing. Don't go too low on the infill ratio or the speaker clamp will break.rnrnGreat feel and stability in Prusament PLA Galaxy Black, 0.2mm layer height, 30% gyroid infill. I'm sure it will work with any filament (PETG, ASA, ABS).
Category: Computer