1 / 1
Core One to Gen2 Upgrade - Screw Organizer (for screws removed from CoreOne) — zdjęcie 1

Core One to Gen2 Upgrade - Screw Organizer (for screws removed from CoreOne)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Screw Organizer for Screws removed from your Core One during the assembly process to Gen2.

Ocena
4,75 / 5
Polubienia
13
Pobrania
80
Wydruki
4
Wyświetlenia
322
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Hey Folks,

its Upgrade time again!!!!

As you have to remove some screws from your CoreOne during the assembly process to CoreOne Gen2 using the Upgrade Kit, I have made this organizer in which you can easily sort and store the removed screws till they are needed in a later step during the assembly process.

This is a quick and dirty model but it will so the Job.

I know there is an organizer which has a box for each screw which is build in a CoreOne but I thought a smaller version with less print time and less filament usage is better for my needs.

Should be printed in around one hour and needs 33gram of filament.

Edit1: I have printed it in 0.2 layer height.

If something is too small or if I missed a screw type in the manual, write me in the comments then I will update it.

Thank you and have fun with the assembly.

M3ro

Tagi