1 / 6
Laptop Screen to Portable Monitor Enclosure (N116B6 & OPLY 58C) — zdjęcie 1
1 / 6

Laptop Screen to Portable Monitor Enclosure (N116B6 & OPLY 58C)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Turn your old N116B6 laptop matrix into a functional portable monitor using the OPLY 58C controller board.

Ocena
0 / 5
Polubienia
5
Pobrania
10
Wydruki
0
Wyświetlenia
104
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

Give a second life to your old laptop screen! This project allows you to convert a 11.6" N116B6 laptop matrix into a sleek, portable external display.

The enclosure is specifically designed around the affordable OPLY 58C controller board (easily found on AliExpress).

🛠 Assembly Instructions:

  1. Print the parts: Modify the .FCStd source file beforehand if you need to make any design tweaks or tolerance adjustments.

  2. Mount the screen: Place the laptop matrix inside the main enclosure body.

  3. Create the status LED light guide: Fill the indicator hole with clear hot glue from the inside. Push it through carefully so that a small, neat dome (droplet) forms on the front surface of the case.

  4. Install the button board: Insert the plastic buttons and the button PCB into place, then secure the PCB with a screw. Crucial: Make sure to complete this step before installing the main controller board!

  5. Install the main board: Place the main controller board and connect the LCD matrix ribbon cable to it. Pay close attention to neat cable management to avoid pinches.

  6. Assemble the case: Screw the control unit housing onto the main monitor enclosure.

  7. Attach the stand: Mount the folding kickstand to the case. Ensure that the stand tilts back to a sufficient angle. If the movement feels tight, remove any excess plastic or imperfections using a hand tool (like a hobby knife or file).

  8. Share your build: Take a photo of your finished portable monitor and please share it in the "Makes" section — I'd love to see your results!

What files are included:

  • Full Project File (.FCStd): Created in FreeCAD 1.1. It features complete 3D mockups of both the N116B6 matrix and the OPLY 58C board. Use this to modify the design, adjust tolerances, or adapt it to a different screen model.

  • Bambu Studio Print Profile (.3mf): Ready-to-print file optimized for the Bambu Lab A1 mini. Some large parts have been split/cut to easily fit on a compact 180x180 mm build plate.


⚠ Important Note / Warning:
The project needs some minor adjustments; I made them by processing the printed parts.
Depending on the specific fasteners, screws, or inserts you plan to use, you might need to slightly modify or post-process the mounting holes. Use the provided FreeCAD file to adjust the tolerances for your hardware if necessary.
Please also note that some elements, in particular the unfoldable stand, will also require modifications. If you’re ready to experiment, I can help you and make all the necessary changes.

Tagi