Qlocktwo classic strong wallmount with a lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
if you are planning to wallmount the qlocktwo safely you will recognize that the wallmount that comes delivered with…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 667
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
if you are planning to wallmount the qlocktwo safely you will recognize that the wallmount that comes delivered with the qlocktwo classic seems to be very loose. If you want to mount it in public places just a little push from the bottom can cause a fallling clock. kind of expensive :-)
also if you are planning to customize it especially with the distance you are free to go.
i just designed one with a locking mechanism that holds the clock really tight and also locks the screw in place so it is almost impossible to bumb it off the wall.
one version with a left side lever, the other with a right side lever. 19mm thick and 33mm thick. (the lever fits both). have fun with it.
step file included if you want to change the thickness of it. It prints in two parts so you can print it on a 25x21cm printbed.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Filament: Any PLA any
Category: Kitchen & Dining