10'' backet for Pi 5 Argon NEO NVME
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed a 10'' rack tray form my Rpi 5 so I made this one
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Recently move my network infrastructure into a 10'' rack. But could not find a tray my Rpi5 in a Argon Neo housing. So, I had to design this one.
I had some space around the enclosure, so I added two keystone slots for the HDMI connections (The USB's are exposed by design). Initially there were three keystones but I've modified one to use a on/off button for the Rpi power.
I wanted it in ABS (as most of the Rack parts) but the initial designs were prone to warp. It required several iterations to reach this design. Still suffers some warping but I could live with it.