Dummy ballistic plate for airsoft plate carrier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A light weight multi-curve dummy plate that is more rigid than foam and more comfortable than plywood or real plates.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This is just a cheap, easy solution for the plates in your airsoft plate carrier if you want more rigidity than the foam it comes with but don’t want to deal with the weight (And cost) of real plates, or the finicky cutting of plywood.
This model will fit most plate carriers but you might want to measure your’s and scale it either up or down accordingly.
Both pieces should be printed upright with a brim. You should use at least four wall loops and decent infill. You should not need supports.
After printing simply put the two pieces together and glue them.