Snapmaker U1 + IKEA Lack + Creality Space Pi X4L Dryer Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This design uses the Ikea Lack end table. Works with any printer that fit the base of the table
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 14
- Wydruki
- 1
- Wyświetlenia
- 432
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Snapmaker U1 + IKEA Lack + Creality Space Pi X4L Dryer Remix
This is a remix of the original project: https://makerworld.com/en/models/2527889-snapden-snapmaker-u1-ikea-lack-sunlu-sp2#profileId-2781718
Print recommendations:
Filament: PETG works best. Handle heat and longer lasting.
Layer height: 0.20 mm
Walls: 4+
Infill: 20–35% (Gyroid or Adaptive Cubic)
Top/Bottom layers: 5+
Part Requirements:
- M4x8mm Socket Head Screws (x40) https://amzn.to/4yicGXx
- M4x6mm Button Head Screws (x12): https://amzn.to/3SQsroe
- M4x12mm or #6 5/8" Wood Screws (x8): https://www.homedepot.com/p/6-x-5-8-in-Phillips-Flat-Head-Zinc-Plated-Wood-Screw-12-Pack-807011/204275569
- M4M4x6x6 Heat Set Inserts (x52): https://amzn.to/4wya6e9
- 16" Soft Close Drawer Slides (x1): https://amzn.to/3Rprq6a
