Long Reach Stapler Base for Bostitch Inpower Eco Desktop Stapler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Max reach is about 6". Just long enough to staple the center of an 11" sheet of paper.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
This is designed specifically for the Bostitch Inpower Eco Desktop Stapler. The upper part of the stapler snaps into this new base just like the original. It uses the strike plate from the original base. Staples are still easily replaceable from the bottom. Designed to be able to staple halfway across an 11" long sheet of paper for making notebooks. Maximum reach is about 6".
Print settings:
Print orientation - Print on its side as provided. Turn supports on. This allows layer orientation to be the strongest for the compliant hinge.
Wall loops - at least 3.
Infill - Works great and feels substantial at 100% concentric infill, but not necessary. Use at least 5%.
Material - Only tested in PETG. If you use any other material with success, please post a make and let me know.
Installation:
To remove the strike plate from the original base, gently pry it out with a flathead screwdriver.
To install the strike plate into the new base, firmly press it into the cutout. Then take a hot blade or soldering iron and press the nub sticking up through the middle until it's flush. This will hold it securely and permanently in the new base.
To install the stapler into the new base, insert pins on the upper into the larger holes on the model while the upper stapler is vertical(perpendicular to the base). They snap in easier from the bottom. Once those pins are clipped in, pivot the stapler down(the staple tray may pop open, just like it does in the original base, just push it back in). It will take about the force of stapling a page for the lower pins to snap into place.
