30cm 50 led pixel star for Bunnings Spiral Obelisk
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted a star I could print for my Bunnings Spiral Obelisk, and I'm too lazy to split a string of 50 pixels into 30,…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 683
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Wanted a star I could print for my Bunnings Spiral Obelisk, and I'm too lazy to split a string of 50 pixels into 30, or 25 so I spent 3 days (off and on) drawing and laying out the pixels in this - twice cos the first time I forgot that fusion 360 takes circles as diameter but polygons as radius, boy did that look big in the slicer.
Features:
- Obviously holds 50 pixels
- Sits on top of the Bunnings Spiral Obelisk - depending on QC at the factory may even actually positively engage the ball at the top (2 of my 4 did)
- 2 zip tie holes so the weight of the cables isn't pulling on any nodes.
You will need:
- 1 x 3D Printer with a 300x300mm build plate
- 2 x zip ties
- 50x 12mm LED pixel nodes
Important Note: Flip the everything so that the flat face is on the build plate unless your printer is mad good at bridging and you like a lot of supports.
Something that might be fun is to sub model the star in the middle of the star
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
10
Filament: Esun PETG Black
Notes:
I'm sorry, this model is really 300x300 depending on your printer and your slicer and your filament settings you may need to convince your printer it's a 305x305 printer due to line thickness.
I assure you, it does fit on a 300x300 bedNo brim or skirt.
Category: Other