1 / 2
Pavo20 Pro II 4S Landing Gear — zdjęcie 1
1 / 2

Pavo20 Pro II 4S Landing Gear

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple landing gear for new Pavo20 Pro II 4S

Ocena
0 / 5
Polubienia
2
Pobrania
13
Wydruki
0
Wyświetlenia
65
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

This is a simple landing gear designed for the Pavo20 Pro II 4S. It fits closely around the battery mounting plate and under the battery strap.  The strap does not go around the gear so it does use up an strap length.  Printed in PLA with 5 wall loops the gear seems fairly strong while still providing a little shock absorption.  Weight is just over 6 gm.

Tested with following batteries:  BetaFPV LAVA II 4S 580 mAH, Tatu 4S 650 mAH

Installation:  Pinch the battery strap together and slide the landing gear down over the top.  The gear will pass over the strap with a small push.

UPDATE: uploaded a slightly stronger version V2