LayersFactory
Zgłoś model
1 / 3
Modular Stubby Screwdriver Handles with Internal Bit Storage (1" & 2" Bits) — zdjęcie 1
1 / 3

Modular Stubby Screwdriver Handles with Internal Bit Storage (1" & 2" Bits)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

DPs_Designs

DPs_Designs

@DPs_Designs_4882792

Compact stubby driver handles for standard 1/4" hex bits. Features bit storage, magnet slot, and modular grip styles!

Ocena
0 / 5
Polubienia
8
Pobrania
31
Wydruki
0
Wyświetlenia
126
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (9)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane

Upgrade your workshop tool kit with these ultra-compact stubby driver handles designed for standard 1/4" hex bits. Built for tight spaces where a full-size driver can’t reach, each handle features hollow internal storage to stash your extra bits on the go.

  • Two Size Variants: Modeled specifically for standard 1" bits and longer 2" bits.

  • Modular Ergonomics: Choose between smooth straight grips or finger-grooved contours, paired with your choice of a flat cap or rounded-over cap for comfortable palm pressure.

  • Magnetic Bit Retention: Includes an internal socket for a 6mm x 3mm neodymium magnet. Because the magnet channel is slightly smaller than the 1/4" hex drive profile, it can be press-fit from either direction during assembly to keep your bits locked in place.

  • Snug Friction-Fit Caps: The caps push-fit tight to keep stored bits secure inside the handle without rattling loose.

🛠 Maker Note: This design is fresh off the CAD setup! If you print a set, please drop a comment, upload a make, or share your feedback on the tolerance and fit so I can fine-tune future updates.

 

Dimensions

1” Bit Version:

  • OD: 1.155”

  • Length: 1.5”

  • Bit Inset Length: 0.3”

  • Storage Dia: 0.65”

  •  

2” Bit Version:

  • OD: 1.155”

  • Length: 2.75”

  • Bit Inset Length: 0.5”

  • Storage Dia: 0.65”

 

Print Settings

  • Material: PETG or ABS/ASA (Recommended for workshop durability, drop resistance, and torque strength).

  • Layer Height: 0.12mm to 0.20mm (Lower layer heights yield cleaner friction-fit tolerances on caps).

  • Wall Loops / Perimeters: 4+ walls (Crucial for functional tools—extra walls handle high twisting torque far better than extra infill).

  • Infill: 20% or higher (Gyroid or Grid pattern for balanced structural integrity).

 

Explore More Workshop Upgrades

Browse my full catalog of custom adapters, dust collection fittings, and workshop jigs here:

Tagi

organizerworkshoptoolsscrewdriverhandtoolhexbitedcstubbybitdriverbitstorage