1 / 3
Gilette Venus Comfortglide Travel Case — zdjęcie 1
1 / 3

Gilette Venus Comfortglide Travel Case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A magnetic closing, print-in-place travel case for the Gilette Venus Comfortglide razor

Ocena
5 / 5
Polubienia
3
Pobrania
20
Wydruki
0
Wyświetlenia
75
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

NEEDED HARDWARE

4x 6X3 cm Neodymium magnets like this one

WHY THIS MODEL

When going on holidays, a loose razor in the toiletry bag is never a good idea. Now, there are some razor caps that can be downloaded, but then the sensitive razor tilting mechanism is still exposed and if you want to travel after shaving, will wet the toiletry bag. Therefore, my wife thought life would be nicer if it was not in the toiletry bag at all. 

PRINTING

I printed mine with Overture PETG White on a Prusa Core One Plus (Gen1). As it goes, I had some partial clogging issues which resolved itself by leaving black marks on part of the print. However, I could not be bothered to reprint, so you'll probably have better luck than me. I added the STEP files for PLA & PETG. The difference is the tolerance in the hinge, which is larger for the PETG one due to the intricacies of this filament. Ask me how I know. 

I chose PETG for its strength as we generally travel hand luggage only and it should survive people using their behinds to close suitcases. PLA will probably also be fine. 

Anyhow, have fun with the print. 

Tagi