1 / 4
Look Keo to Flat Pedal Adaptor with Reflector Space — zdjęcie 1
1 / 4

Look Keo to Flat Pedal Adaptor with Reflector Space

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Look Keo to Flat Pedal Adaptor with Reflector Space for CatEye RR-1 Pedal reflector. Tested with Favero Assioma Duo.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
28
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

In UK, if ride a bicycle between sunset and sunrise required pedal have reflector. Reflector also need to meet BS6102/2 standard. But my powermeter don't have any of that. So I make this pedal adaptor with reflector space. I'm not plan to ride after sunset, but just in case something went wrong. I have to ride after sunset. With this adaptor, I won't break the law. And able to use normal shoes.

Print config:

  • Filament: Prusament PETG

  • Layer height: 0.2 

  • Perimeters: 5

  • Infill: Gyroid 20%

  • Support: Yes for cleat. And remember add support blocker for reflector space.

Tested with Favero Assioma Duo. No problem found. But only have one side. I did make a version have both side. After print. I feel that layer is too weak when ride on back side. FDM problem :P

Tagi