Temperature and Humidity Solar Radiation Shield
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted to provide more accurate temperature and humidity readings for my home weather station by moving the Ecowitt…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 131
- Wydruki
- 0
- Wyświetlenia
- 1302
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Wanted to provide more accurate temperature and humidity readings for my home weather station by moving the Ecowitt WH32 sensor out of the patio (lots of concrete around)
This is a modular press fit radiation shield that'll hold 2 WH32 style sensors. I have in mine a WH32 temperature and humidity sensor along with a WH57 lightning sensor.
You will want to print out:
- 12 Body
- 1 Top
- 1 Base
- 2 Stick
There's no reason you can't expand or shrink this design for your own sensors or even lighting, you just need to model a replacement for the stick which has a 60mm round base to slot into the base of the unit.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
38
Filament: PolyMaker PETG White
Notes:
If you're using this for weather measurements, please remember that white is the colour you want.
This should all print without supports.Layout Tips
- Place the flat side of theLid against the bed
- Place the side with the holes for theBody against the bed
- Place the side with the holes for theBase against the bed
- Place the long flat back of theStick against the bed
Post-Printing
- Push fit each of theBody components together
- Push fit theLid on top
- Push theSticks into theBase
- Mount your devices
- Push theBody & Lid assembly down onto theBase
Category: Outdoor & Garden