Cookbook Holder With Removable Backer For Easier Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sturdy little cookbook holder for small to medium cookbooks. Can be scaled up for larger books. Has a removable backer
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This cookbook holder is a two-piece design that is sized for medium size cookbooks, but can be scaled to fit large ones as well.
Two-piece design will probably require two plates for most printers, but at least these piece can be printed without supports.
Comes apart for easier storage.
I printed in PLA with a 0.6mm nozzle using only 3 wall loops and 5% gyroid infill. Walls and infill could always be manipulated if you feel you need a more dense base or backer.
I didn't make truly parametric but if you want to mess with it in Onshape here's the link: https://cad.onshape.com/documents/97a4d527a4a2eda69dcca454/w/5a6eb133de6dcb5a55368d41/e/8f1536a57882e05a4df3fc91