mini aca alertronic 5000
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
the 3d model file set for my mini alertronic 5000
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
this model includes 2 different versions of the horn array frame. one that is 1 singular part, and one more that is split into 2 separate parts. this is in case your 3d printer is too small for the whole frame.
the recommended pole diameter is 5cm. tip 1: if the pole mount doesn't fit easily, sand the outside of the pole down with some rough grit sandpaper until the pole mount fits without getting stuck. tip 2: run the rotator on 4 volts dc instead of 6 volts. 6 volts makes it turn a bit too fast. tip 3: print the horn array standpost with 100% infill to help balance the head properly.
gear motor for rotator: https://www.ebay.com/itm/157729217519
screws for mounting the gear motor (select 3/16th inch): https://www.ebay.com/itm/202278899735
speakers (order 6): https://www.ebay.com/itm/194088323893
collector rings: https://www.ebay.com/itm/195959306564
assembly screws: https://www.ebay.com/itm/252466154907