LumenPnP Discard Bin Screw In
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A discard bin for Opulo's LumenPnP that attaches to the edge of the staging plate.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
A bin for discarded components that fits to the edge of the staging plate on the Opulo LumenPnP.
This bin is designed to attach using the same size screws that some of the LumenPnP accessories use, which are M3 10mm long hex head screws. These can be found on McMaster-Carr as part 91280A041. Slightly longer screws might be a bit easier to use, but these work fine.
On the bottom, you can either secure them with wingnuts or regular M3 nuts.
The screws fit the model a bit snugly, but will press into place as you tighten them from below.
This model needs to be printed with supports, and will likely turn out best if you print it upside-down and use a different/dissimilar material for the support interface.