50mm tube for 6 Meter Flowerpot Antenna ham radio
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Antenna Choke/Coil for ham radio
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I needed a 6 meter antenna for FT8 and it required 13 winds at 50mm diameter of 50 ohm coax for the choke. The holes are sized and spaced for 13 winds of RG-8X. The coil can also be used for other ham radio antennas. The antenna I made is a basic "Flowerpot" vertical antenna with the shield cut and removed 49 inches (1245mm) from the end of the coil and the center conductor extending an additional 50 1/8 inches (1273mm) past where the shielding was removed. You can see it has good VSWR in the lower portion of the 6 meter band for FT8 and the DX portion. lengths can be altered for other frequencies as well.
*Tested with my Rig Expert Match analyzer.