1 / 2
BeamCut — 90° & 45° Jigsaw Cutting Guide — zdjęcie 1
1 / 2

BeamCut — 90° & 45° Jigsaw Cutting Guide

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Quick printable jig to help you make straight, quick crosscuts on thinner beams if a jigsaw is all you have handy.

Ocena
0 / 5
Polubienia
7
Pobrania
38
Wydruki
0
Wyświetlenia
178
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Designed for a quick garden build where I only brought portable power tools, this is a simple 3D-printed guide for making straight 90° or 45° cuts in timber beams with a jigsaw.

The guide is clamped directly to the workpiece and provides a taller fence than a regular carpenter’s square. It also has a sizeable clamping pad, allowing the guide to be held securely with a clamp rather than relying on hand pressure alone. This makes it much less likely to slip during the cut and makes repeated cuts quicker and more consistent.

The guide is deliberately simple: mark the desired cut line, position the saw at the start of the line, then align the guide with the saw and clamp it firmly. Finally you can run the jigsaw base along the fence. For a 45° cut, use the corresponding angled face of the guide.

The most important thing to check before cutting is blade length. The jigsaw blade must be long enough to pass completely through the full thickness of the beam, with some additional length available for the stroke of the saw. A blade that is too short can catch in the material or prevent the saw from cutting cleanly through the bottom of the beam.

Tips

  • Make sure the guide is sitting firmly against a straight surface of the workpiece before tightening the clamp.

  • Clamp the guide securely, but avoid excessive force that could deform the printed part.

  • Make absolutely sure that your clamp is not in the future path of the blade!

  • Let the jigsaw do the cutting. Excessive sideways pressure against the fence can deflect the blade and result in a cut that is not square.

  • For the cleanest results, use a sharp blade appropriate for the timber and let the saw reach full speed before entering the cut.

  • Based on my own experience: do not step on the guide!

Safety

This is a guide for a power tool, not a safety device. Always follow the manufacturer's safety instructions for your jigsaw. Keep both hands clear of the blade and make sure the workpiece is securely supported so that it cannot move or fall as the cut is completed, and that the blade won't come into contact with any of its parts, or with the clamp, any time during the cut.

Because the guide is 3D-printed, inspect it before use. Do not use it if it is cracked, badly worn, or otherwise damaged. Keep in mind that common 3D-printing plastics can soften or deform when exposed to high temperatures, so this jig is intended for normal woodworking use rather than applications involving significant heat.

Finally, always make sure the jigsaw's base is actually riding against the guide fence throughout the cut. The guide can help you make a straight cut, but it cannot compensate for a bent or deflecting blade.

Sizing

Designed for 80 × 80 mm timber and printable on a Prusa MINI (180 × 180 mm build area). The 80 mm fence height is a convenient design choice rather than a requirement that the workpiece be exactly 80 mm thick. Other workpiece dimensions may also be accommodated depending on the available clamping and bearing surface.

If you have a reason to use this guide with a different beam size, a larger printer, or even a different cutting angle, feel free to request a variant. There may be useful applications or design considerations I haven't thought of, and I'm happy to consider adapting the model if there is a good reason for it.

Printing

Print in PETG if you want to keep it, but PLA is fine if you're planning just a one-off build. Everything is large and straight, so feel free to use the largest nozzle and thickest layers you have available.

Tagi