1 / 2
Catellated Spacers for Beehive Frames — zdjęcie 1
1 / 2

Catellated Spacers for Beehive Frames

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Removable castellated spacers for National beehive. Sizes for 9, 10 and 11 frames.

Ocena
0 / 5
Polubienia
2
Pobrania
3
Wydruki
0
Wyświetlenia
24
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Share Alike

These removable castellated frame spacers allow you to gradually space your frames seasonally, so that your bees don't have to fill huge gaps until you get to the spacing you require and fit a permanent castellation. They have been designed to fit into National supers around existing runners.

The spacers have been split into two 210mm sections to allow them to be printed on most 3D printers. The 9 and 11 frame spacers have a (clearly marked) a and b part while the 10 frame spacer sections are the same. You will need to print spacers for both sides of the super.

This is my first model so I hope you get some use out of it.

Tagi